Skip to content

chore(deps): bump the redis group across 1 directory with 2 updates - #8917

Open
dependabot[bot] wants to merge 1 commit into
mainfrom
dependabot/go_modules/redis-62462fd434
Open

dependabot[bot] wants to merge 1 commit into
mainfrom
dependabot/go_modules/redis-62462fd434

Conversation

@dependabot

@dependabot dependabot Bot commented on behalf of github Nov 11, 2026 •

Copy link
Copy Markdown
Contributor

Bumps the redis group with 2 updates in the / directory: github.com/redis/go-redis/extra/redisotel/v9 and github.com/redis/go-redis/v9.

Updates github.com/redis/go-redis/extra/redisotel/v9 from 9.21.0 to 9.23.0

Release notes

Sourced from github.com/redis/go-redis/extra/redisotel/v9's releases.

9.23.0

This is a minor release. It contains everything from 9.23.0-beta.1, so these notes cover the full 9.22.0 → 9.23.0 upgrade.

⚠️ Changes to check when you upgrade from 9.22.0:

  • Go 1.26 is now the minimum Go version (#4060). The go directive of the root module and of the submodules moved from 1.24 to 1.26, as part of the dependency bumps for govulncheck findings. Projects that build with Go 1.24 or 1.25 must upgrade the toolchain.
  • Each Client has a dedicated pipeline connection pool (#4002). This includes failover clients and cluster node clients. Pipeline, TxPipeline, and autopipeline operations use this pool, so they do not compete with regular commands for main-pool connections. The pool is for burst capacity only: it dials only when necessary, an unused pool holds zero connections, and if the pool is full an operation uses the main pool. Set PipelinePoolSize: -1 to get the previous single-pool behavior.
  • AutoPipelineOptions.MaxBatchBytes has a default of 128 KiB (before, there was no limit). The default prevents a write/reply deadlock; it is not a throughput control. The buffers of the pipeline pool also have a default of 128 KiB.

⚠️ Changes to experimental APIs since 9.23.0-beta.1 (no effect if you upgrade from 9.22.0):

  • AutoPipelineOptions.FullDuplexFastSubmit is removed (#4018). The submit channel is replaced by a queue that takes a full wave of commands in one lock, so the separate fast path is not necessary. Remove the field from your options.
  • Options.ClientSideCacheRefreshRecencyWindow is removed (#4034). Refresh-on-invalidate now reads again every cached entry of an invalidated key and does not look at how recently the entry was read. On a write-heavy keyspace this means refresh traffic across the full resident cache. Remove the field from your options.
  • LocalCache.LRUClock() is removed (#4034). It returned the recency token that the removed recency window used, and has no replacement. Remove calls to it.
  • ClientSideCacheInvalidationBatchWindow served stale values in beta.1 (#4033). Under load the batcher applied only ~15% of invalidations, and the cache served invalidated values with a ~100% hit rate. 9.23.0 applies all of them. If you used this option on beta.1, upgrade.

🚀 Highlights

Full-Duplex Auto-Pipelining (Experimental)

Set AutoPipelineOptions.FullDuplex to enable the full-duplex mode of the automatic pipeliner. The default mode sends one batch per round trip. In full-duplex mode the engine holds one pipeline-pool connection, and a writer goroutine and a reader goroutine move the ordered command stream in both directions at the same time. On a high-latency link each command completes in approximately one round-trip time (RTT) on a single connection. On a 50 ms WAN profile: ~389k ops/s at 52 ms p50, against ~207k ops/s at 116 ms on the half-duplex ordered path.

The mode works on both faces of a standalone Client (AutoPipeline() and AsyncAutoPipeline()), and natively on a ClusterClient when routing goes to masters only. On a cluster, one child engine per master sends each command to the node that owns its slot, and follows MOVED / ASK redirects and retryable replies (LOADING, READONLY, ...) through the usual cluster redirect path. With replica routing (ReadOnly, RouteByLatency, or RouteRandomly), the autopipeliner uses the half-duplex shard flushers, which obey the shard picker. Config().FullDuplex reports the mode in effect.

Options:

  • FullDuplexWindow — the maximum number of commands in flight (backpressure).
  • FullDuplexIdleTimeout and FullDuplexMaxHold — when the engine returns the held connection to the pool. The pool hooks then do re-authentication and maintenance-notification handoffs.
  • MaxFlushDelay — now also used in full-duplex mode (#4014). The writer waits only when enough commands are in flight, so low-concurrency callers keep the 1×RTT behavior. With MaxFlushDelay=250µs at 1024 callers: +22% ops/s and −26% p99. The default is 0, so this is opt-in.
  • NumShards — on a standalone Client, the number of full-duplex engines (#4022). See below.

Pipeline() on the full-duplex connection (#4021). Standalone Client only. Before, ap.Pipeline() used a pooled connection for each Exec. It now submits the batch to the engine as one contiguous run (FDPipelined), so replies come back in submit order, as on a dedicated connection. At 256–1024 callers with 10 commands per Exec: +49% to +52% throughput on one socket instead of ~150. Errors, retries, hooks, and metrics behave like an ordinary pipeline. A batch that cannot use the stream (a blocking command, a per-command read timeout, a diverted command, or a batch larger than the queue) falls back to the ordinary pipeline. TxPipeline stays on a pooled connection, because MULTI/EXEC needs connection affinity. On a ClusterClient, ap.Pipeline() is still the ordinary cluster pipeline. A batch that the queue cannot admit now reserves its slots and waits in a first-come line, so single commands cannot starve a long pipeline (#4057, merged as part of #4021) by @​vlady-kotsev.

Several engines on one client (#4022). With FullDuplex, NumShards > 1 now means N engines on one client: one pool, one hook chain, N held connections. Commands route by a hash of their first key, so commands on the same key stay on one connection and keep their order without Unordered. Keyless commands are distributed round-robin. An FDPipelined batch stays on one engine. The pipeline pool must hold at least NumShards connections for each full-duplex autopipeliner. More engines help only under high concurrency: with 10-command pipelines, 8 engines were 30% slower than 1 at 8 callers, equal at about 128 callers, and 2.2× faster at 1024 callers.

The full-duplex path supports blocking commands, Options.Limiter (one admission per written batch), per-command and pipeline hooks, OTel metrics, retry budgets (a NoRetry command is never sent again after it is on the wire), and seamless maintenance handoffs. Limits of the stream model:

  • A hook can observe a command, but cannot stop it. A ProcessHook that returns without calling next does not cancel the command on the full-duplex path; the command is already queued on the held connection. Run policy or kill-switch hooks on a plain client or on the half-duplex autopipeliner.
  • Diverted commands are not ordered with the stream. The engine diverts blocking commands, connection-hostile commands, and managed HIMPORT commands. On the async face, wait for the result of a diverted command before you submit a command that depends on it.
  • Single commands on the full-duplex stream do not use the client-side cache. If CSC is enabled, a cacheable command on the stream does not read or write the cache.
  • Duration metrics are recorded per reply. A command that fails before it reaches the reader (lease failure, limiter denial, retry exhaustion, close) calls the error callback but records no operation-duration sample.
rdb := redis.NewClient(&redis.Options{
	Addr: "localhost:6379",
	AutoPipelineOptions: &redis.AutoPipelineOptions{
		FullDuplex: true, // stream commands on one held connection, ~1 RTT each
	},
})
defer rdb.Close()
</tr></table> 

... (truncated)

Changelog

Sourced from github.com/redis/go-redis/extra/redisotel/v9's changelog.

9.23.0 (2026-10-05)

This is a minor release. It contains everything from 9.23.0-beta.1, so these notes cover the full 9.22.0 → 9.23.0 upgrade. The release adds:

  • An experimental full-duplex mode for the automatic pipeliner, now with Pipeline() on the full-duplex connection and several engines on one client.
  • Refresh-on-invalidate and miss coalescing for client-side caching, and a faster cache read path.
  • Better distribution of cluster reads under latency-based routing.
  • Client.EphemeralConn, an opt-in limit on queued autopipeline commands, and many stability fixes.

⚠️ Changes to check when you upgrade from 9.22.0:

  • Go 1.26 is now the minimum Go version (#4060). The go directive of the root module and of the submodules moved from 1.24 to 1.26, as part of the dependency bumps for govulncheck findings. Projects that build with Go 1.24 or 1.25 must upgrade the toolchain.
  • Each Client has a dedicated pipeline connection pool (#4002). This includes failover clients and cluster node clients. Pipeline, TxPipeline, and autopipeline operations use this pool, so they do not compete with regular commands for main-pool connections. The pool is for burst capacity only: it dials only when necessary, an unused pool holds zero connections, and if the pool is full an operation uses the main pool. Set PipelinePoolSize: -1 to get the previous single-pool behavior.
  • AutoPipelineOptions.MaxBatchBytes has a default of 128 KiB (before, there was no limit). The default prevents a write/reply deadlock; it is not a throughput control. The buffers of the pipeline pool also have a default of 128 KiB.

⚠️ Changes to experimental APIs since 9.23.0-beta.1 (no effect if you upgrade from 9.22.0):

  • AutoPipelineOptions.FullDuplexFastSubmit is removed (#4018). The submit channel is replaced by a queue that takes a full wave of commands in one lock, so the separate fast path is not necessary. Remove the field from your options.
  • Options.ClientSideCacheRefreshRecencyWindow is removed (#4034). Refresh-on-invalidate now reads again every cached entry of an invalidated key and does not look at how recently the entry was read. On a write-heavy keyspace this means refresh traffic across the full resident cache. Remove the field from your options.
  • LocalCache.LRUClock() is removed (#4034). It returned the recency token that the removed recency window used, and has no replacement. Remove calls to it.
  • ClientSideCacheInvalidationBatchWindow served stale values in beta.1 (#4033). Under load the batcher applied only ~15% of invalidations, and the cache served invalidated values with a ~100% hit rate. 9.23.0 applies all of them. If you used this option on beta.1, upgrade.

🚀 Highlights

Full-Duplex Auto-Pipelining (Experimental)

Set AutoPipelineOptions.FullDuplex to enable the full-duplex mode of the automatic pipeliner. The default mode sends one batch per round trip. In full-duplex mode the engine holds one pipeline-pool connection, and a writer goroutine and a reader goroutine move the ordered command stream in both directions at the same time. On a high-latency link each command completes in approximately one round-trip time (RTT) on a single connection. On a 50 ms WAN profile: ~389k ops/s at 52 ms p50, against ~207k ops/s at 116 ms on the half-duplex ordered path.

The mode works on both faces of a standalone Client (AutoPipeline() and AsyncAutoPipeline()), and natively on a ClusterClient when routing goes to masters only. On a cluster, one child engine per master sends each command to the node that owns its slot, and follows MOVED / ASK redirects and retryable replies (LOADING, READONLY, ...) through the usual cluster redirect path. With replica routing (ReadOnly, RouteByLatency, or RouteRandomly), the autopipeliner uses the half-duplex shard flushers, which obey the shard picker. Config().FullDuplex reports the mode in effect.

Options:

  • FullDuplexWindow — the maximum number of commands in flight (backpressure).
  • FullDuplexIdleTimeout and FullDuplexMaxHold — when the engine returns the held connection to the pool. The pool hooks then do re-authentication and maintenance-notification handoffs.
  • MaxFlushDelay — now also used in full-duplex mode (#4014). The writer waits only when enough commands are in flight, so low-concurrency callers keep the 1×RTT behavior. With MaxFlushDelay=250µs at 1024 callers: +22% ops/s and −26% p99. The default is 0, so this is opt-in.
  • NumShards — on a standalone Client, the number of full-duplex engines (#4022). See below.

Pipeline() on the full-duplex connection (#4021). Standalone Client only. Before, ap.Pipeline() used a pooled connection for each Exec. It now submits the batch to the engine as one contiguous run (FDPipelined), so replies come back in submit order, as on a dedicated connection. At 256–1024 callers with 10 commands per Exec: +49% to +52% throughput on one socket instead of ~150. Errors, retries, hooks, and metrics behave like an ordinary pipeline. A batch that cannot use the stream (a blocking command, a per-command read timeout, a diverted command, or a batch larger than the queue) falls back to the ordinary pipeline. TxPipeline stays on a pooled connection, because MULTI/EXEC needs connection affinity. On a ClusterClient, ap.Pipeline() is still the ordinary cluster pipeline. A batch that the queue cannot admit now reserves its slots and waits in a first-come line, so single commands cannot starve a long pipeline (#4057, merged as part of #4021) by @​vlady-kotsev.

Several engines on one client (#4022). With FullDuplex, NumShards > 1 now means N engines on one client: one pool, one hook chain, N held connections. Commands route by a hash of their first key, so commands on the same key stay on one connection and keep their order without Unordered. Keyless commands are distributed round-robin. An FDPipelined batch stays on one engine. The pipeline pool must hold at least NumShards connections for each full-duplex autopipeliner. More engines help only under high concurrency: with 10-command pipelines, 8 engines were 30% slower than 1 at 8 callers, equal at about 128 callers, and 2.2× faster at 1024 callers.

The full-duplex path supports blocking commands, Options.Limiter (one admission per written batch), per-command and pipeline hooks, OTel metrics, retry budgets (a NoRetry command is never sent again after it is on the wire), and seamless maintenance handoffs. Limits of the stream model:

  • A hook can observe a command, but cannot stop it. A ProcessHook that returns without calling next does not cancel the command on the full-duplex path; the command is already queued on the held connection. Run policy or kill-switch hooks on a plain client or on the half-duplex autopipeliner.
  • Diverted commands are not ordered with the stream. The engine diverts blocking commands, connection-hostile commands, and managed HIMPORT commands. On the async face, wait for the result of a diverted command before you submit a command that depends on it.
  • Single commands on the full-duplex stream do not use the client-side cache. If CSC is enabled, a cacheable command on the stream does not read or write the cache.
  • Duration metrics are recorded per reply. A command that fails before it reaches the reader (lease failure, limiter denial, retry exhaustion, close) calls the error callback but records no operation-duration sample.
rdb := redis.NewClient(&redis.Options{
</tr></table> 

... (truncated)

Commits
  • 6f2b263 chore(release): v9.23.0 (#4074)
  • ec50c69 feat(conn): add DisposableConn to discard on Close (#4039)
  • e3d2548 fix(pool): fix ConnStateMachine waiter races (#4072)
  • 2ee6d86 fix(pool): wake waiters when a connection is released to the pool (#4028)
  • 83d45ed fix:(proto): support uintptr in WriteArg (#4054)
  • c2002af docs(example): add full-duplex examples (#4061)
  • b5f8864 feat(autopipeline): add MaxQueuedCommands hard limit (#4070)
  • 89ecbc5 fix(options): reject invalid skip_verify values in ParseURL (#4064)
  • f813adc feat(autopipeline): run N full-duplex engines on one client (#4022)
  • 349bcf4 feat(autopipeline): run Pipeline on the full-duplex connection (#4021)
  • Additional commits viewable in compare view

Updates github.com/redis/go-redis/v9 from 9.21.0 to 9.23.0

Release notes

Sourced from github.com/redis/go-redis/v9's releases.

9.23.0

This is a minor release. It contains everything from 9.23.0-beta.1, so these notes cover the full 9.22.0 → 9.23.0 upgrade.

⚠️ Changes to check when you upgrade from 9.22.0:

  • Go 1.26 is now the minimum Go version (#4060). The go directive of the root module and of the submodules moved from 1.24 to 1.26, as part of the dependency bumps for govulncheck findings. Projects that build with Go 1.24 or 1.25 must upgrade the toolchain.
  • Each Client has a dedicated pipeline connection pool (#4002). This includes failover clients and cluster node clients. Pipeline, TxPipeline, and autopipeline operations use this pool, so they do not compete with regular commands for main-pool connections. The pool is for burst capacity only: it dials only when necessary, an unused pool holds zero connections, and if the pool is full an operation uses the main pool. Set PipelinePoolSize: -1 to get the previous single-pool behavior.
  • AutoPipelineOptions.MaxBatchBytes has a default of 128 KiB (before, there was no limit). The default prevents a write/reply deadlock; it is not a throughput control. The buffers of the pipeline pool also have a default of 128 KiB.

⚠️ Changes to experimental APIs since 9.23.0-beta.1 (no effect if you upgrade from 9.22.0):

  • AutoPipelineOptions.FullDuplexFastSubmit is removed (#4018). The submit channel is replaced by a queue that takes a full wave of commands in one lock, so the separate fast path is not necessary. Remove the field from your options.
  • Options.ClientSideCacheRefreshRecencyWindow is removed (#4034). Refresh-on-invalidate now reads again every cached entry of an invalidated key and does not look at how recently the entry was read. On a write-heavy keyspace this means refresh traffic across the full resident cache. Remove the field from your options.
  • LocalCache.LRUClock() is removed (#4034). It returned the recency token that the removed recency window used, and has no replacement. Remove calls to it.
  • ClientSideCacheInvalidationBatchWindow served stale values in beta.1 (#4033). Under load the batcher applied only ~15% of invalidations, and the cache served invalidated values with a ~100% hit rate. 9.23.0 applies all of them. If you used this option on beta.1, upgrade.

🚀 Highlights

Full-Duplex Auto-Pipelining (Experimental)

Set AutoPipelineOptions.FullDuplex to enable the full-duplex mode of the automatic pipeliner. The default mode sends one batch per round trip. In full-duplex mode the engine holds one pipeline-pool connection, and a writer goroutine and a reader goroutine move the ordered command stream in both directions at the same time. On a high-latency link each command completes in approximately one round-trip time (RTT) on a single connection. On a 50 ms WAN profile: ~389k ops/s at 52 ms p50, against ~207k ops/s at 116 ms on the half-duplex ordered path.

The mode works on both faces of a standalone Client (AutoPipeline() and AsyncAutoPipeline()), and natively on a ClusterClient when routing goes to masters only. On a cluster, one child engine per master sends each command to the node that owns its slot, and follows MOVED / ASK redirects and retryable replies (LOADING, READONLY, ...) through the usual cluster redirect path. With replica routing (ReadOnly, RouteByLatency, or RouteRandomly), the autopipeliner uses the half-duplex shard flushers, which obey the shard picker. Config().FullDuplex reports the mode in effect.

Options:

  • FullDuplexWindow — the maximum number of commands in flight (backpressure).
  • FullDuplexIdleTimeout and FullDuplexMaxHold — when the engine returns the held connection to the pool. The pool hooks then do re-authentication and maintenance-notification handoffs.
  • MaxFlushDelay — now also used in full-duplex mode (#4014). The writer waits only when enough commands are in flight, so low-concurrency callers keep the 1×RTT behavior. With MaxFlushDelay=250µs at 1024 callers: +22% ops/s and −26% p99. The default is 0, so this is opt-in.
  • NumShards — on a standalone Client, the number of full-duplex engines (#4022). See below.

Pipeline() on the full-duplex connection (#4021). Standalone Client only. Before, ap.Pipeline() used a pooled connection for each Exec. It now submits the batch to the engine as one contiguous run (FDPipelined), so replies come back in submit order, as on a dedicated connection. At 256–1024 callers with 10 commands per Exec: +49% to +52% throughput on one socket instead of ~150. Errors, retries, hooks, and metrics behave like an ordinary pipeline. A batch that cannot use the stream (a blocking command, a per-command read timeout, a diverted command, or a batch larger than the queue) falls back to the ordinary pipeline. TxPipeline stays on a pooled connection, because MULTI/EXEC needs connection affinity. On a ClusterClient, ap.Pipeline() is still the ordinary cluster pipeline. A batch that the queue cannot admit now reserves its slots and waits in a first-come line, so single commands cannot starve a long pipeline (#4057, merged as part of #4021) by @​vlady-kotsev.

Several engines on one client (#4022). With FullDuplex, NumShards > 1 now means N engines on one client: one pool, one hook chain, N held connections. Commands route by a hash of their first key, so commands on the same key stay on one connection and keep their order without Unordered. Keyless commands are distributed round-robin. An FDPipelined batch stays on one engine. The pipeline pool must hold at least NumShards connections for each full-duplex autopipeliner. More engines help only under high concurrency: with 10-command pipelines, 8 engines were 30% slower than 1 at 8 callers, equal at about 128 callers, and 2.2× faster at 1024 callers.

The full-duplex path supports blocking commands, Options.Limiter (one admission per written batch), per-command and pipeline hooks, OTel metrics, retry budgets (a NoRetry command is never sent again after it is on the wire), and seamless maintenance handoffs. Limits of the stream model:

  • A hook can observe a command, but cannot stop it. A ProcessHook that returns without calling next does not cancel the command on the full-duplex path; the command is already queued on the held connection. Run policy or kill-switch hooks on a plain client or on the half-duplex autopipeliner.
  • Diverted commands are not ordered with the stream. The engine diverts blocking commands, connection-hostile commands, and managed HIMPORT commands. On the async face, wait for the result of a diverted command before you submit a command that depends on it.
  • Single commands on the full-duplex stream do not use the client-side cache. If CSC is enabled, a cacheable command on the stream does not read or write the cache.
  • Duration metrics are recorded per reply. A command that fails before it reaches the reader (lease failure, limiter denial, retry exhaustion, close) calls the error callback but records no operation-duration sample.
rdb := redis.NewClient(&redis.Options{
	Addr: "localhost:6379",
	AutoPipelineOptions: &redis.AutoPipelineOptions{
		FullDuplex: true, // stream commands on one held connection, ~1 RTT each
	},
})
defer rdb.Close()
</tr></table> 

... (truncated)

Changelog

Sourced from github.com/redis/go-redis/v9's changelog.

9.23.0 (2026-10-05)

This is a minor release. It contains everything from 9.23.0-beta.1, so these notes cover the full 9.22.0 → 9.23.0 upgrade. The release adds:

  • An experimental full-duplex mode for the automatic pipeliner, now with Pipeline() on the full-duplex connection and several engines on one client.
  • Refresh-on-invalidate and miss coalescing for client-side caching, and a faster cache read path.
  • Better distribution of cluster reads under latency-based routing.
  • Client.EphemeralConn, an opt-in limit on queued autopipeline commands, and many stability fixes.

⚠️ Changes to check when you upgrade from 9.22.0:

  • Go 1.26 is now the minimum Go version (#4060). The go directive of the root module and of the submodules moved from 1.24 to 1.26, as part of the dependency bumps for govulncheck findings. Projects that build with Go 1.24 or 1.25 must upgrade the toolchain.
  • Each Client has a dedicated pipeline connection pool (#4002). This includes failover clients and cluster node clients. Pipeline, TxPipeline, and autopipeline operations use this pool, so they do not compete with regular commands for main-pool connections. The pool is for burst capacity only: it dials only when necessary, an unused pool holds zero connections, and if the pool is full an operation uses the main pool. Set PipelinePoolSize: -1 to get the previous single-pool behavior.
  • AutoPipelineOptions.MaxBatchBytes has a default of 128 KiB (before, there was no limit). The default prevents a write/reply deadlock; it is not a throughput control. The buffers of the pipeline pool also have a default of 128 KiB.

⚠️ Changes to experimental APIs since 9.23.0-beta.1 (no effect if you upgrade from 9.22.0):

  • AutoPipelineOptions.FullDuplexFastSubmit is removed (#4018). The submit channel is replaced by a queue that takes a full wave of commands in one lock, so the separate fast path is not necessary. Remove the field from your options.
  • Options.ClientSideCacheRefreshRecencyWindow is removed (#4034). Refresh-on-invalidate now reads again every cached entry of an invalidated key and does not look at how recently the entry was read. On a write-heavy keyspace this means refresh traffic across the full resident cache. Remove the field from your options.
  • LocalCache.LRUClock() is removed (#4034). It returned the recency token that the removed recency window used, and has no replacement. Remove calls to it.
  • ClientSideCacheInvalidationBatchWindow served stale values in beta.1 (#4033). Under load the batcher applied only ~15% of invalidations, and the cache served invalidated values with a ~100% hit rate. 9.23.0 applies all of them. If you used this option on beta.1, upgrade.

🚀 Highlights

Full-Duplex Auto-Pipelining (Experimental)

Set AutoPipelineOptions.FullDuplex to enable the full-duplex mode of the automatic pipeliner. The default mode sends one batch per round trip. In full-duplex mode the engine holds one pipeline-pool connection, and a writer goroutine and a reader goroutine move the ordered command stream in both directions at the same time. On a high-latency link each command completes in approximately one round-trip time (RTT) on a single connection. On a 50 ms WAN profile: ~389k ops/s at 52 ms p50, against ~207k ops/s at 116 ms on the half-duplex ordered path.

The mode works on both faces of a standalone Client (AutoPipeline() and AsyncAutoPipeline()), and natively on a ClusterClient when routing goes to masters only. On a cluster, one child engine per master sends each command to the node that owns its slot, and follows MOVED / ASK redirects and retryable replies (LOADING, READONLY, ...) through the usual cluster redirect path. With replica routing (ReadOnly, RouteByLatency, or RouteRandomly), the autopipeliner uses the half-duplex shard flushers, which obey the shard picker. Config().FullDuplex reports the mode in effect.

Options:

  • FullDuplexWindow — the maximum number of commands in flight (backpressure).
  • FullDuplexIdleTimeout and FullDuplexMaxHold — when the engine returns the held connection to the pool. The pool hooks then do re-authentication and maintenance-notification handoffs.
  • MaxFlushDelay — now also used in full-duplex mode (#4014). The writer waits only when enough commands are in flight, so low-concurrency callers keep the 1×RTT behavior. With MaxFlushDelay=250µs at 1024 callers: +22% ops/s and −26% p99. The default is 0, so this is opt-in.
  • NumShards — on a standalone Client, the number of full-duplex engines (#4022). See below.

Pipeline() on the full-duplex connection (#4021). Standalone Client only. Before, ap.Pipeline() used a pooled connection for each Exec. It now submits the batch to the engine as one contiguous run (FDPipelined), so replies come back in submit order, as on a dedicated connection. At 256–1024 callers with 10 commands per Exec: +49% to +52% throughput on one socket instead of ~150. Errors, retries, hooks, and metrics behave like an ordinary pipeline. A batch that cannot use the stream (a blocking command, a per-command read timeout, a diverted command, or a batch larger than the queue) falls back to the ordinary pipeline. TxPipeline stays on a pooled connection, because MULTI/EXEC needs connection affinity. On a ClusterClient, ap.Pipeline() is still the ordinary cluster pipeline. A batch that the queue cannot admit now reserves its slots and waits in a first-come line, so single commands cannot starve a long pipeline (#4057, merged as part of #4021) by @​vlady-kotsev.

Several engines on one client (#4022). With FullDuplex, NumShards > 1 now means N engines on one client: one pool, one hook chain, N held connections. Commands route by a hash of their first key, so commands on the same key stay on one connection and keep their order without Unordered. Keyless commands are distributed round-robin. An FDPipelined batch stays on one engine. The pipeline pool must hold at least NumShards connections for each full-duplex autopipeliner. More engines help only under high concurrency: with 10-command pipelines, 8 engines were 30% slower than 1 at 8 callers, equal at about 128 callers, and 2.2× faster at 1024 callers.

The full-duplex path supports blocking commands, Options.Limiter (one admission per written batch), per-command and pipeline hooks, OTel metrics, retry budgets (a NoRetry command is never sent again after it is on the wire), and seamless maintenance handoffs. Limits of the stream model:

  • A hook can observe a command, but cannot stop it. A ProcessHook that returns without calling next does not cancel the command on the full-duplex path; the command is already queued on the held connection. Run policy or kill-switch hooks on a plain client or on the half-duplex autopipeliner.
  • Diverted commands are not ordered with the stream. The engine diverts blocking commands, connection-hostile commands, and managed HIMPORT commands. On the async face, wait for the result of a diverted command before you submit a command that depends on it.
  • Single commands on the full-duplex stream do not use the client-side cache. If CSC is enabled, a cacheable command on the stream does not read or write the cache.
  • Duration metrics are recorded per reply. A command that fails before it reaches the reader (lease failure, limiter denial, retry exhaustion, close) calls the error callback but records no operation-duration sample.
rdb := redis.NewClient(&redis.Options{
</tr></table> 

... (truncated)

Commits
  • 6f2b263 chore(release): v9.23.0 (#4074)
  • ec50c69 feat(conn): add DisposableConn to discard on Close (#4039)
  • e3d2548 fix(pool): fix ConnStateMachine waiter races (#4072)
  • 2ee6d86 fix(pool): wake waiters when a connection is released to the pool (#4028)
  • 83d45ed fix:(proto): support uintptr in WriteArg (#4054)
  • c2002af docs(example): add full-duplex examples (#4061)
  • b5f8864 feat(autopipeline): add MaxQueuedCommands hard limit (#4070)
  • 89ecbc5 fix(options): reject invalid skip_verify values in ParseURL (#4064)
  • f813adc feat(autopipeline): run N full-duplex engines on one client (#4022)
  • 349bcf4 feat(autopipeline): run Pipeline on the full-duplex connection (#4021)
  • Additional commits viewable in compare view

@dependabot
dependabot Bot requested a review from a team as a code owner November 11, 2026 05:35
@dependabot dependabot Bot added dependencies Pull requests that update a dependency file go Pull requests that update go code labels Nov 11, 2026
@changeset-bot

changeset-bot Bot commented Nov 11, 2026 •

Copy link
Copy Markdown

⚠️ No Changeset found

Latest commit: 4d95113

Merging this PR will not cause a version bump for any packages. If these changes should not result in a new version, you're good to go. If these changes should result in a version bump, you need to add a changeset.

This PR includes no changesets

When changesets are added to this PR, you'll see the packages that this PR includes changesets for and the associated semver types

Click here to learn what changesets are, and how to add one.

Click here if you're a maintainer who wants to add a changeset to this PR

@github-actions

Copy link
Copy Markdown
Contributor

atlas migrate lint on server/migrations

Status Step Result
No migration files detected  
ERD and visual diff generated View Visualization
No issues found View Report
Read the full linting report on Atlas Cloud

@github-actions

Copy link
Copy Markdown
Contributor

atlas migrate lint on clickhouse/migrations

Status Step Result
No migration files detected  
ERD and visual diff generated View Visualization
No issues found View Report
Read the full linting report on Atlas Cloud

@blacksmith-sh

This comment has been minimized.

@cursor cursor Bot left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Compatibility: 3/10

Merge readiness: blocked

Dependency

  • github.com/redis/go-redis/v9 v9.21.0 → v9.23.0
  • github.com/redis/go-redis/extra/redisotel/v9 v9.21.0 → v9.23.0

This repo uses go-redis for caching, rate limiting, and tunnel routing, and uses redisotel for Redis tracing and metrics. go-redis itself has no breaking change for this repo: 9.22 changes default timeouts and backoff, and 9.23 raises the Go minimum to 1.26, which the repo's Go 1.27.1 meets.

The score is low because redisotel 9.23.0 requires go.opentelemetry.io/otel/log v1.47.0. That moves otel/log from 0.20.0 to 1.47.0, along with otel, metric, and trace from 1.44.0 to 1.47.0. The 1.x Logs API removed log.Value, log.KeyValue, and log.KeyValueFromAttribute. As a result, server/internal/mcpconnectionattempts stops compiling (export.go:314: undefined: log.KeyValueFromAttribute, plus log.Value and log.KeyValue in export_test.go). So does every server package that imports it. server/internal/otelpub uses the same removed types. This is the same break that blocked PR #8746.

Lock and manifest

go.mod and go.sum match the intended redis bump plus the transitive OTel moves it forces, and mise run go:tidy left the tree clean.

Checks

The local server build failed with undefined: log.KeyValueFromAttribute in server/internal/mcpconnectionattempts, so the server checks, tests, and demo-seed jobs cannot compile. The tunnel gateway, CLI, hooks, and plog builds and the functions tests passed. The Atlas and Postgres migration steps need ATLAS_TOKEN and Postgres, so I left them to CI.

CI

Head 2f0258e0612701a95402cb32e4abc5b0a389622f failed: server-build, server-checks, all five server-test shards, demo-seed-safety, and Code runner validate fail on the same otel/log compile error, and CI Gate fails as a result.

Change required

Migrate server/internal/mcpconnectionattempts, server/internal/otelpub, and the other go.opentelemetry.io/otel/log call sites and tests from log.Value/log.KeyValue to the 1.x attribute types, or hold redisotel at v9.21.0 until that migration lands.

Open in Web View Automation 

Sent by Cursor Automation: Review Dependabot PRs (gram)

@dependabot
dependabot Bot force-pushed the dependabot/go_modules/redis-62462fd434 branch 3 times, most recently from e4e195d to 9184fa6 Compare November 16, 2026 22:06
@blacksmith-sh

This comment has been minimized.

@dependabot
dependabot Bot force-pushed the dependabot/go_modules/redis-62462fd434 branch from 9184fa6 to 375daac Compare November 17, 2026 22:46
@blacksmith-sh

blacksmith-sh Bot commented Nov 17, 2026 •

Copy link
Copy Markdown
Contributor

Found 117 test failures on Blacksmith runners:

Failures

Test View Logs
github.com/speakeasy-api/gram/server/cmd/directory-roles/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/gram/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/sigint-bench/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/skillefficacybench/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/tools/migrations/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/tools/migrations/riskfindings/TestMain View Logs
github.com/speakeasy-api/gram/server/cmd/tools/sweep_builtin_presets/TestMain View Logs
github.com/speakeasy-api/gram/server/internal/access/TestMain View Logs
github.com/speakeasy-api/gram/server/internal/access/slackrequests/TestMain View Logs
github.com/speakeasy-api/gram/server/internal/admin/TestMain View Logs

...and 107 more test failures. View all on Blacksmith

Fix with [code]smith
Need help on this PR? Tag @codesmith-bot with what you need.

@dependabot
dependabot Bot force-pushed the dependabot/go_modules/redis-62462fd434 branch from 375daac to 0e2a323 Compare November 18, 2026 05:34
Bumps the redis group with 2 updates in the / directory: [github.com/redis/go-redis/extra/redisotel/v9](https://github.com/redis/go-redis) and [github.com/redis/go-redis/v9](https://github.com/redis/go-redis).


Updates `github.com/redis/go-redis/extra/redisotel/v9` from 9.21.0 to 9.23.0
- [Release notes](https://github.com/redis/go-redis/releases)
- [Changelog](https://github.com/redis/go-redis/blob/master/RELEASE-NOTES.md)
- [Commits](redis/go-redis@v9.21.0...v9.23.0)

Updates `github.com/redis/go-redis/v9` from 9.21.0 to 9.23.0
- [Release notes](https://github.com/redis/go-redis/releases)
- [Changelog](https://github.com/redis/go-redis/blob/master/RELEASE-NOTES.md)
- [Commits](redis/go-redis@v9.21.0...v9.23.0)

---
updated-dependencies:
- dependency-name: github.com/redis/go-redis/extra/redisotel/v9
  dependency-version: 9.23.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: redis
- dependency-name: github.com/redis/go-redis/v9
  dependency-version: 9.23.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: redis
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot
dependabot Bot force-pushed the dependabot/go_modules/redis-62462fd434 branch from 0e2a323 to 4d95113 Compare November 21, 2026 00:43

This branch has not been deployed

No deployments
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

dependencies Pull requests that update a dependency file go Pull requests that update go code

Projects

None yet

Development

Successfully merging this pull request may close these issues.

0 participants